Hi, I'm just getting started and am trying to get UART working. Didn't have luck communicating with a device so I tried the uart example "glasgow repl uart -V 3.3" but I'm getting an error, my output is below

```I: g.hardware.device: device already has bitstream ID 5e2f9be88e75f232d247d633a912cf06
I: g.hardware.assembly: port A voltage set to 3.3 V
I: g.hardware.assembly: port B voltage set to 3.3 V
I: g.cli: running handler for applet 'uart'
I: g.applet.interface.uart: dropping to REPL; use 'help(iface)' to see available APIs
  + Exception Group Traceback (most recent call last):
  |   File "/home/wlucas/.local/bin/glasgow", line 8, in <module>
  |     sys.exit(run_main())
  |              ^^^^^^^^^^
  |   File "/home/wlucas/glasgow/glasgow/software/glasgow/cli.py", line 1032, in run_main
  |     exit(asyncio.new_event_loop().run_until_complete(main()))
  |          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  |   File "/usr/lib/python3.12/asyncio/base_events.py", line 687, in run_until_complete
  |     return future.result()
  |            ^^^^^^^^^^^^^^^
  |   File "/home/wlucas/glasgow/glasgow/software/glasgow/cli.py", line 710, in main
  |     async with asyncio.TaskGroup() as group:
  |   File "/usr/lib/python3.12/asyncio/taskgroups.py", line 145, in __aexit__
  |     raise me from None
  | ExceptionGroup: unhandled errors in a TaskGroup (1 sub-exception)
  +-+---------------- 1 ----------------
    | Traceback (most recent call last):
    |   File "/home/wlucas/glasgow/glasgow/software/glasgow/cli.py", line 669, in run_applet
    |     await applet.repl(args)
    |   File "/home/wlucas/glasgow/glasgow/software/glasgow/applet/interface/uart/__init__.py", line 419, in repl
    |     run_callback=self.assembly.flush
    |                  ^^^^^^^^^^^^^^^^^^^
    | AttributeError: 'HardwareAssembly' object has no attribute 'flush'
    +------------------------------------
```