no luck:
```
let mut clocks = Config::default();
    // set the internal clock to run at max (80MHz)
    clocks.rcc.hsi = true;
    clocks.rcc.hse = Some(embassy_stm32::rcc::Hse {
        freq: Hertz(8_000_000),
        mode: embassy_stm32::rcc::HseMode::Oscillator,
    });
    clocks.rcc.pll = Some(embassy_stm32::rcc::Pll {
        source: embassy_stm32::rcc::PllSource::HSE,
        // mul: embassy_stm32::rcc::PllMul::MUL20,
        mul: embassy_stm32::rcc::PllMul::MUL24,
        divp: Some(embassy_stm32::rcc::PllPDiv::DIV7),
        divq: Some(embassy_stm32::rcc::PllQDiv::DIV4),
        divr: Some(embassy_stm32::rcc::PllRDiv::DIV4),
        prediv: embassy_stm32::rcc::PllPreDiv::DIV1,
    });
    // USB
    clocks.rcc.pllsai1 = Some(embassy_stm32::rcc::Pll {
        source: embassy_stm32::rcc::PllSource::HSE,
        prediv: embassy_stm32::rcc::PllPreDiv::DIV1,
        mul: embassy_stm32::rcc::PllMul::MUL12,
        divp: Some(embassy_stm32::rcc::PllPDiv::DIV7),
        divq: Some(embassy_stm32::rcc::PllQDiv::DIV2),
        divr: Some(embassy_stm32::rcc::PllRDiv::DIV2),
    });
    clocks.rcc.pllsai2 = Some(embassy_stm32::rcc::Pll {
        source: embassy_stm32::rcc::PllSource::HSE,
        prediv: embassy_stm32::rcc::PllPreDiv::DIV1,
        mul: embassy_stm32::rcc::PllMul::MUL8,
        divp: Some(embassy_stm32::rcc::PllPDiv::DIV7),
        divq: None,
        divr: Some(embassy_stm32::rcc::PllRDiv::DIV2),
    });
    clocks.rcc.mux.clk48sel = embassy_stm32::rcc::mux::Clk48sel::PLL1_Q;
    clocks.rcc.sys = embassy_stm32::rcc::Sysclk::HSE;
    clocks.rcc.ahb_pre = embassy_stm32::rcc::AHBPrescaler::DIV2;
    clocks.rcc.apb1_pre = embassy_stm32::rcc::APBPrescaler::DIV1;
    clocks.rcc.apb2_pre = embassy_stm32::rcc::APBPrescaler::DIV1;
    clocks.rcc.mux.adcsel = embassy_stm32::rcc::mux::Adcsel::SYS;
```

dmesg:
```
[25768.504935] usb 1-2.4.1: device descriptor read/64, error -110
[25768.681906] usb 1-2.4.1: new full-speed USB device number 118 using xhci_hcd
[25792.379667] usb 1-2.4.1: new full-speed USB device number 119 using xhci_hcd
[25792.521687] usb 1-2.4.1: device descriptor read/64, error -71
[25792.765687] usb 1-2.4.1: device descriptor read/64, error -71
[25792.944660] usb 1-2.4.1: new full-speed USB device number 120 using xhci_hcd
[25793.085674] usb 1-2.4.1: device descriptor read/64, error -71
[25793.332672] usb 1-2.4.1: device descriptor read/64, error -71
[25793.439727] usb 1-2.4-port1: attempt power cycle
[25794.027655] usb 1-2.4.1: new full-speed USB device number 121 using xhci_hcd
[25804.271619] usb 1-2.4.1: device descriptor read/8, error -110
[25819.631463] usb 1-2.4.1: device descriptor read/8, error -110
[25819.809393] usb 1-2.4.1: new full-speed USB device number 122 using xhci_hcd
[25825.264344] xhci_hcd 0000:08:00.1: Timeout while waiting for setup device command
[25830.895294] xhci_hcd 0000:08:00.1: Timeout while waiting for setup device command
[25831.103262] usb 1-2.4.1: device not accepting address 122, error -62
[25831.103343] usb 1-2.4.1: WARN: invalid context state for evaluate context command.
[25831.103388] usb 1-2.4-port1: unable to enumerate USB device
```