How can i test if my probe-rs die?
```
     Running `probe-rs run --chip RP2040 target/thumbv6m-none-eabi/debug/switch-embassy-rs`
Error: Connecting to the chip was unsuccessful.

Caused by:
    0: An ARM specific error occurred.
    1: An error occurred in the communication with an access port or debug port.
    2: Target device did not respond to request.
holo@nixos ~/w/e/switch-embassy-rs (main) [1]> lsusb |grep Probe
Bus 005 Device 006: ID 2e8a:000c Raspberry Pi Debug Probe (CMSIS-DAP)
holo@nixos ~/w/e/switch-embassy-rs (main)> 
```
Yesterday everything was working fine and not it don't want to flash any of my 2 picos (one pico can be dead but second im seeing in DHCP so it should work). And similar question how can i check my first pico if its really dead?