sorry if this is a stupid question - but what is the `glasgow flash` command meant to do?
I installed the glasgow tool via pipx, as per https://glasgow-embedded.org/latest/install.html#
I then saw this page - https://glasgow-embedded.org/latest/develop/firmware.html
It briefly mentioned something about `glasgow flash` - but didn't give much details.

Anyway, I did try running it at the CLI:

```victorhooi@Victors-MacBook-Pro-3 ~/code [2]> glasgow flash
I: g.cli: reading device configuration
I: g.cli: device has serial C3-20240303T144722Z
I: g.cli: device has flashed firmware
I: g.cli: device does not have flashed bitstream
I: g.cli: using built-in firmware
I: g.cli: programming configuration and firmware
I: g.cli: configuration and firmware identical```