> glasgow run memory-25x -V 3.3 --pin-cs 0 --pin-cipo 1 --pin-sck 2 --pin-copi 3 identify                                                                                                   130
I: g.device.hardware: generating bitstream ID 425eafc4814ed61f81683693d20111cc
I: g.cli: running handler for applet 'memory-25x'
I: g.applet.memory.25x: port(s) A, B voltage set to 3.3 V
I: g.applet.memory.25x: JEDEC manufacturer 0xc2 (Macronix) device 0x05 (8-bit ID)
I: g.applet.memory.25x: JEDEC manufacturer 0xc2 (Macronix) device 0x2010 (16-bit ID)
I: g.applet.memory.25x: device has valid SFDP 1.0 (JESD216) descriptor
I: g.applet.memory.25x:   SFDP table #0: JEDEC, Flash Parameter Table 1.0 (JESD216)
I: g.applet.memory.25x:     density (Mebibits)     : 0
I: g.applet.memory.25x:     density (Mebibytes)    : 0
I: g.applet.memory.25x:     address byte count     : 3
I: g.applet.memory.25x:     write granularity      : 64 byte(s)
I: g.applet.memory.25x:     sector sizes           : 4096, 65536
I: g.applet.memory.25x:     sector size 4096       : erase opcode 0x20
I: g.applet.memory.25x:     sector size 65536      : erase opcode 0xd8
I: g.applet.memory.25x:     double transfer rate   : no
I: g.applet.memory.25x:     fast read modes        : (1-1-2)
I: g.applet.memory.25x:     fast read mode (1-1-2) : opcode 0x3b, 8 wait states, 0 mode bits
I: g.applet.memory.25x:   SFDP table #1: Macronix, Unknown Table 0xff 1.0